Filter
Top Products
Speakers
Description Spare part number
Speakers (include left and right speakers and cables) 719865-001
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 46), and then remove the following components:
a. Optical drive (see
Optical drive on page 47)
b. Hard drive (see
Hard drive on page 49)
c. WLAN module (see
WLAN module on page 51)
d. Keyboard (see
Keyboard on page 56)
e. Top cover (see
Top cover on page 60)
f. System board (see
System board on page 74)
Remove the speakers:
1. Release the speaker cables from the clips (1) and routing channel built into the base enclosure.
2. Release the clips (2) that secure the speakers to the base enclosure.
94 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts