Filter
Top Products
d. Lift the display hinges off the display enclosure (2).
9. If it is necessary to replace the WLAN antenna cables and transceivers:
WLAN and WWAN antennas are available in the Antenna Kit, spare part number 702876-001.
a. Release the WLAN antenna transceivers (1) from the clips built into the display enclosure.
(The WLAN antenna transceivers are attached to the display enclosure with double-
sided tape.)
b. Detach the WLAN antenna cables from the routing channels (2) built into the display
enclosure.
c. Remove the WLAN antenna cables and transceivers. The WLAN antenna cables and
transceivers are included in the Antenna Kit, spare part number 702876-001.
Component replacement procedures 81