Filter
Top Products
Front I/O and USB Panel Housing Assembly
Description Spare part number
Front I/O and USB assembly without card reader 667853-001
Front I/O and USB assembly with card reader 667852-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 49).
2. Remove the access panel (
Access Panel on page 50)
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel (
Front Bezel on page 51).
5. Remove the cables from the metal clip built into the bottom of the chassis, and then unplug the
three cables that connect the assembly to the system board. The assembly cables connect to
the following system board connectors:
HP Pro 3400/3410
models
HP Pro 3405
models
HP Pro 3500
models
HP Pro 3505
models
HP Pro 3515
models
F_AUDIO – yellow
connector
F_AUDIO – yellow
connector
F_AUDIO – yellow
connector
F_AUDIO – yellow
connector
F_AUDIO – yellow
connector
F_USB2 – white
connector
F_USB1 – white
connector
F_USB1 – white
connector
F_USB2 – white
connector
F_USB2 – white
connector
F_USB3 – white
connector
F_USB4 – white
connector
F_USB2 – white
connector
SPDIF_OUT1 –
white connector
F_USB30_1 – blue
connector
72 Chapter 7 Removal and Replacement Procedures – Microtower Chassis