Filter
Top Products
72 Chapter 5
Options and Accessories
Options
5 Year Service Support W50
Option W50 provides your analyzer with a total of 5
years of service support. This adds a 2 year service
contract to the analyzer’s base 3 year warranty.
50 Ω to 75 Ω Matching
Pad
1D7
This option provides a 50 Ω to 75 Ω matching pad
with dc block to be used on the analyzer input. The
pad has a frequency range of £ MHz to 2 GHz. It
adapts your standard 50
Ω analyzer to be
compatible with a 75
Ω system under test.
Connector types are 50
Ω Type-N (m) to 75 Ω BNC
(f).
50 Ohm Tracking
Generator
1DN
Option 1DN provides a 9 kHz to 1.5 GHz built-in
tracking generator for the Agilent E4401B and the
Agilent E4411B. Option 1DN provides a 9 kHz to 3
GHz built-in tracking generator for the Agilent
E4402B, E4403B, E4404B, E4405B, E4407B and
E4408B. This source creates a source-receiver
combination that allows insertion-loss, frequency
response, and return-loss measurements. The
tracking generator has a wide distortion-free
dynamic range, plus good sensitivity and
selectivity.
75 Ohm Input
Impedance
1DP
This option provides a 75 Ω input impedance
instead of the standard 50
Ω impedance. Analyzers
with this option use cables, circuit boards, and front
panels that are different from the standard units.
Option 1DP is only available on the Agilent E4401B
and E4411B.
Option 1DP is not available after the purchase of
your analyzer.
75 Ohm Tracking
Generator
1DQ
Option 1DQ provides a 1 MHz to 1.5 GHz built-in
tracking generator for the Agilent E4401B and the
Agilent E4411B. This source creates a
source-receiver combination that allows
insertion-loss, frequency response, and return-loss
measurements. The tracking generator has a wide
distortion-free dynamic range, plus good sensitivity
and selectivity.
Option 1DQ has a 75
Ω output impedance, and is
only available with Option 1DP.
Name
Option
Number
Description