Filter
Top Products
Chapter 4 55
Viewing Catalogs and Saving Files
Saving a File
Copying a File
1. To access the Copy menu, press File, Copy. This menu function brings up 2 directory
boxes as described by the From: and To: fields located directly above the boxes. Refer to
Figure 4-9.
Figure 4-8. Copy Menu
2. Put a formatted floppy in the A: drive.
3. Select the type of file you want to copy (setup, state, trace, limits, screens, or
corrections). In this example you are copying a trace file from the C: drive to the A:
drive; press,
Type, Trace.
4. Press
Dir (in the key menu) to underline From:. Notice the From: field (just above the
top directory box) highlights the location from which you will be copying. Using the
navigation keys (
Dir Up, Direct select, step keys, or front panel knob), locate the
C:\START\ directory.
5. Scroll to highlight the file displayed in the directory box from which you wish to copy. In
this example, you will need to highlight the file RENAME.
6. Press
Dir (in the key menu) to underline To:. The To: field (just above the bottom
directory box) is highlighting the location to which you will be copying. Using the
navigation keys as described above, highlight the A:\ drive.
NOTE When pressing Dir (To), the file chosen in the From: location is no longer
highlighted, however the Name: field above the From directory box displays
the chosen file; in this example: RENAME.TRC.