Filter
Top Products
Configuring the HBAs30
Scan Fibre Channel Devices
This option scans the Fibre Channel loop and lists all connected devices by loop ID. Information
about each device is listed, such as the vendor name, product name, and revision. This information
is useful when configuring the HBA and connected devices.
Fibre Disk Utility
This option scans the Fibre Channel loop and lists all connected devices by loop ID. You can select
a hard disk and perform a low-level format or verify the hard disk.
CAUTION: Performing a low-level format destroys all data on the hard disk.
Loopback Data Test
This option lets you perform a loopback test. Ensure that the Fibre Channel loop is up or that a
loopback plug is connected to the HBA before starting the test.
Select Host Adapter
If your system has multiple HBAs, use this option to select and then configure or view the settings for
an HBA.