Filter
Top Products
System Library (SysLib) A set of common routines for use by both the Test Controller
and the Test Modules. These routines perform I/O, string
parsing, and system control.
For more information on ODE, see the Itanium Processor Family (IPF) Offline Diagnostics and Utilities
CD Overview at: http://docs.hp.com/en/diag.html#Offline%20Diagnostics
Diagnostic Flowcharts
The diagnostic flowcharts illustrate the following tests:
Flowchart 1: Configuration Test Verifies the configuration of the mass storage interface on
a host using the ioscan (1M) command.
Flowchart 2: Fibre Channel
Connections Test
Checks all hardware connections between your system
and Fibre Channel mass storage devices, to confirm that
they are connected and operational.
Flowchart 3: Boot Test Verifies that the system boots correctly over Fibre Channel.
See the Support Matrix for the Fibre Channel adapter you are troubleshooting for current system
and adapter firmware requirements and other information. Support Matrixes for HP Fibre
Channel adapters are available at: http://docs.hp.com/en/netcom.html#Fibre%20Channel
Figure 3-1 Flowchart 1: Configuration Test
1
HP
adapter
displayed?
Enter the
ioscan command
no
no
4
yes
yes
yes
no
B
A
C
E
H
F
2
Enter the
swlist command
Reinstall
Fibre Channel
software
DONE
Device
displayed?
1
Is the
FC FILESET
displayed?
Go to Flowchart 2
On Flowchart 2
CLAIMED?
Hardware
2
yes
no
Is
System Firm-
ware version
adequate?
yes
Update
Firmware
1
Go to Flowchart 2
G
I
D
no
state =
System
26 Troubleshooting and Maintenance