HP (Hewlett-Packard) FN041UAABA Laptop User Manual


 
Bluetooth module
NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 495064-001. See
Cable Kit
on page 28 for more Cable Kit spare part number information.
Description Spare part number
Bluetooth module for use in all countries and regions 483113-001
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 45).
5. Remove the hard drive (see
Hard drive on page 51).
Remove the Bluetooth module:
1. Position the computer upside-down with the rear toward you.
2. Remove the Bluetooth cover by lifting it straight up (1) and off the computer as far as the cable
connected to the module will allow.
NOTE: The Bluetooth module is housed in the cover.
3. Remove the Bluetooth module from the clip in the cover by sliding it straight down and out of the
cover (2).
4. Disconnect the Bluetooth module cable (3) from the Bluetooth module.
54 Chapter 4 Removal and replacement procedures