Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5.4 Hard Drive
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Loosen the two Phillips PM2.5×5.0 captive screws 1 that
secure the hard drive cover to the computer.
3. Lift the rear edge of the hard drive cover 2, and then swing
it up and forward and remove it.
✎
The hard drive cover is included in the Plastics Kits, spare part
numbers 436184-001 (for use with HP G3000 computer
models) and 436185-001 (for use with Compaq Presario C300
computer models).
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
5400 rpm, 120-GB
5400 rpm, 100-GB
5400 rpm, 80-GB
5400 rpm, 60-GB
435775-001
435774-001
435773-001
435776-001