Filter
Top Products
OfficeJet G55xi
HP Parts Reference Guide™
www.hp.com/go/hpparts
Print Mechanism Parts
Belt
233
C6426-40115 Carriage belt - Moves the carriage assembly across the carriage rod
234
C6429-40001 Paper drive belt
Bracket
235
C6429-00014 Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item
Cable
236
C6426-60059 Cable assembly - Has 4 pin (F) connectors - 4.9cm (1.9 inches) long
237
C6429-80084 Carriage assembly flex cable - Has 24 pin (M) edge connectors - 38.6cm (15.2 inches) long
238
C6734-60008 Cable assembly - Has many connectors: an 18 pin (F), two 3 pin (F), a 4 pin (F), and two 5 pin (F) - Overall length is
72.9cm (28.7 inches)
Carriage
239
C6429-60162 Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC
board, belt attachment hardware, or slider
Cover
240
C6426-40086 Cover for the paper cleanout door assembly
Door
241
C6426-60038 Rear cleanout door assembly - Paper jam cleanout door
Encoder
242
C4557-80019 Paper motor encoder disk
Felt
243
C6409-80003 Lubricating felt (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod
Flag
244
C6426-40052 OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide
245
C6426-40089 DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer
module - Mounts on the upper paper guide behind OOPS flag
Foot
246
C4557-40118 Rubber foot
Gear
247
C4557-40021 Feed roller idler gear
248
C6426-40103 Kicker bar cam gear - Gear with cam lobe and offset pin
249
C6429-40005 Cluster gear
Guide
250
C4557-40121 Paper encoder disk guide
251
C6426-40021 Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the
top of the feed roller assembly - Caution: this part can easily be broken
252
C6426-40098 Lower paper guide housing (Does NOT include any attaching parts)
253
C6429-60141 Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide
Kicker Bar
254
C6426-40118 Kicker bar - Restacks paper in paper input tray stack after the top sheet is picked
Knob
255
C6428-40001 Latch knob - Mounts on the rear paper cleanout door assembly
Latch
256
C4557-40042 Plastic latch (Y-shaped) - Used in conjuction with the knob to hold the rear paper cleanout door assy in place
© 2004 Hewlett-Packard Development Compan
y
, L.P. mercoledì 4 a
g
osto 200
4
9