Filter
Top Products
Power connector
Description Spare part number
Power connector 641137-001
Before removing the power connector cable, remove the following components:
1. Battery (see
Battery on page 48)
2. Service door (see
Service door on page 49)
3. Hard drive (see
Hard drive on page 50)
4. Optical drive (see
Optical drive on page 52)
5. Keyboard (see
Keyboard on page 57)
6. Top cover (see
Top cover on page 60)
Remove the power connector:
1. Position the computer right-side up.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) away from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
70 Chapter 4 Removal and replacement procedures