Filter
Top Products
10.
Remove the power connector (4).
Reverse this procedure to install the power connector cable.
Display assembly
Description Spare part number
14.0-in, HD, LED, display assembly (includes microphone and wireless antenna transceivers and cables)
For use with all computer models:
AntiGlare in pewter finish 646666-001
BrightView in pewter finish 646664-001
For use only with Compaq 435 and Compaq 436 computer models:
AntiGlare in charcoal gray finish 647607-001
BrightView in charcoal gray finish 645984-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
68 Chapter 4 Removal and replacement procedures