Filter
Top Products
5. If it is necessary to replace the display bezel (8.9-inch panel only), flex the inside edges of the
bottom (1), left and right sides (2), and the top (3) of the display bezel until the bezel disengages
from the display enclosure, and then remove the display bezel (4).
The display bezel, spare part number 506333-001, is for use with 8.9-inch panel only.
6. If it is necessary to replace the webcam module, perform the following steps:
a. Open the tab built into the display enclosure shielding that secures the microphone cable, and
then release the microphone from its clip (1).
b. Release the ZIF connector (2) to which the webcam module cable is attached, and then
disconnect the webcam module cable from the display enclosure (3). The microphone and
webcam module cables (for 8.9-inch panels only) are available in the Display Cable Kit, spare
part number 504597-001.
52 Chapter 4 Removal and replacement procedures