Filter
Top Products
Specifications 11
Specifications
In this section
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter specifications.................................. 11
UTP cable specifications.......................................................................................................................... 11
RJ-45 pinouts and crossover function ........................................................................................................ 12
HP NC380T PCI Express Dual Port Multifunction
Gigabit Server Adapter specifications
Specification Value
Network Controller Chipsets Broadcom 5706C
Bus Type PCI Express
Bus Width Four lanes
Bus Speed 2.5 GHz
Data Transfer Method Bus Master DMA
Power Requirement Operating Voltage: +12V +/-8%
Power Consumption: 12.6 Watts
Maximum: 1.05A @ 12V (DC)
Standards Supported IEEE 802.3ab, 802.3ad, 802.3u, 802.3x, 802.3, 802.1p, 802.1q
Dimensions 18.9 cm x 11.1 cm (without bracket) (7.44 x 4.37 inches (L x W))
Connector and Distances Two RJ-45 Connectors, Cable and lengths as follows:
10BASE-T: Category 3, 4, or 5 UTP 100 Meters (328 feet)
100BASE-TX: Category 5 UTP 100 Meters (328 feet)
1000BASE-TX: Category 5 UTP 100 Meters (328 feet)
Interrupts Supported Automatically configured
Temperature Range Operating: 0°C to 55°C (32°F to 131°F)
Storage: -40°C to 85°C (-40°F to 185°F)
Relative Humidity (non-condensing) Operating: 10% to 90%
Storage: 5% to 95%
Safety Compliance CSA Mark (US and Canada)
CE Mark
EN 60590
UTP cable specifications
To connect to the network, the NC380T uses the following cable for 1000Base-T transmission: