HP (Hewlett-Packard) HP Smart Array 256MB Network Card User Manual


 
Storage Controller
One of the following
depending on Model
Performance Models:
HP Smart Array P400/512MB BBWC Controller (RAID 0/1/1+0/5/6)
Base Models:
HP Smart Array P400/256MB Controller (RAID 0/1/1+0/5)
Available upgrades
: 512MB battery-backed write cache (BBWC) or
standalone battery for RAID 0/1/1+0/5/6
Entry Models:
HP Smart Array E200/64MB Controller (RAID 0/1/1+0)
Available upgrades
: 128MB battery-backed write cache (BBWC) for
RAID 0/1/1+0/5
Storage
Diskette Drive
None Standard
Optical Drive
One of the following
depending on Model
None Standard
IDE DVD-ROM/CDRW Combo included on Performance models
Hard Drives
None Standard
Maximum Internal
Storage
Hot Plug SAS
1.168TB
8 x 146GB with standard internal hot plug
SFF SAS drive cage
Remote Management
Integrated Lights Out 2 (iLO2) Standard Management:
Virtual Text Remote Console (pre-OS only)
Remote Serial Console
Virtual Power Button Control
Virtual Unit ID control
Integrated Remote Console
Dedicated & full function shared network connectivity
Embedded system health
Browser, command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health status
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
Intelligent
Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Hot Spare Boot
NOTE:
Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 5