HP (Hewlett-Packard) TFT7210R Computer Monitor User Manual


 
Maintenance 21
Storing the HP TFT7210R
1. Pull the release mechanism toward you with your index fingers to unlock the inner slides.
2. In the same motion, release the release mechanism and move the HP TFT7210R forward into the
stored position.
WARNING: To reduce the risk of personal injury, release the release mechanisms after
pushing the HP TFT7210R slightly forward.
Moving a rack with the HP TFT7210R installed
When moving the HP TFT7210R installed in a rack, HP recommends installing the lock plates.
1. Fully extend the HP TFT7210R until the slides lock into place.
2. Place a lock plate behind the corner of the front plastic bezel, being sure that the top and bottom
holes are aligned with the front plastic bezel pins.
3. From behind the corner of the front plastic bezel, insert a 6-32 screw into the middle hole on the lock
plate, securing it to the HP TFT7210R.
4. Repeat steps 2 and 3 to install the other lock plate.
5. Push the HP TFT7210R back into the rack.
6. Insert an M6 screw into the only visible lock plate hole, securing the HP TFT7210R to the rail.