Filter
Top Products
20
For the drivers supplied on the HP-UX 11.0 CD, see "Meet-
ing System Requirements" in Chapter 1 of the HP-UX 11.0
Installation and Update Guide.
Booting from a boot device connected via a Fibre Channel
fabric switch is not supported. Connect the boot device
directly to the system using one of the available Fibre Chan-
nel cards listed in “Selectable Drivers” on page 9.
• Installing 64-bit Minimal OS
You can now cold install the HP-UX 11.0 64-bit Minimal OS
(bundle name HPUXMinSys32/64)from the Install/Update/
Recovery CD without a problem. If you plan to install
HPUXMinSys32/64 via an Ignite-UX server, however, you
will need to first edit manually the config file produced by
make_config for the Core OS depot. In the config file,
search for this line:
sd_software_list="HPUXMinSys64,r=B.11.00,a=HP
UX_B.11.00_64,v=HP"
Change it to the following:
sd_software_list="HPUXMinSys64 ProgSupport.C-
INC"