Filter
Top Products
3 Yr 6 hr Call-to-Repair Onsite (UW386E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR845E)
Refer to the HP website at:
www.hp.com/networking/services
for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-16 Switch
(J9662A)
Ports
16 RJ-45 autosensing 10/100 ports; Duplex: half or full (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX)
Supports a maximum of 16 autosensing 10/100 ports
Physical characteristics
Dimensions
8.21(w) x 4.21(d) x 1.73(h) in (20.85 x 10.69 x 4.39 cm) (1U height)
Weight
1.43 lb (0.65 kg)
Memory and processor
16 Kb EEPROM; packet buffer size: 2 Mb
Mounting
Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table mounting
Performance
100 Mb Latency
< 10.6 µs (LIFO 64-byte packets)
Throughput
2.3 Mpps (64-byte packets)
Switching capacity
3.2 Gb/s
MAC address table size
8192 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
13 BTU/hr (13.72 kJ/hr)
Voltage
100 - 240 VAC
DC voltage
12 V
Current
0.3 A
Maximum power rating
3.6 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
The exact input voltage and frequency rating are determined by the specific
power adaptor part number ordered. Please select the correct power adaptor
QuickSpecs
HP 1410 Switch series
Technical Specifications
DA - 13674 North America — Version 12 — December 16, 2013
Page 14