Filter
Top Products
HP X132 10G SFP+ LC LR
Transceiver
(J9151A)
A 10-Gigabit transceiver in
SFP+ form-factor that
supports the 10-Gigabit LR
standard, providing 10-
Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical characteristics
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
cm)
Weight
0.04 lb. (.02 kg)
Transceiver form factor
SFP+
Environment
Operating temperature
32°F to 158°F (0°C to 70°C)
Operating relative
humidity
0% to 85%, noncondensing
Nonoperating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption
typical
0.9 W
Power consumption
maximum
1 W
Cabling
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Maximum distance:
2m-10km with 9/125 µm single-mode cable
Cable length
2m to 10km
Fiber type
Single Mode
Notes
Conditioning patch cord cables are not supported.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP SFP+ Transceivers (SR, LRM, LR and ER)
Technical Specifications
DA - 13285 Worldwide — Version 3 — September 5, 2012
Page 3