Filter
Top Products
HEATH CUSTOM PRESS MICR-Line LASER PLATES
PRINTING PRESS START-UP
• Mount the MICR-Line™ plate on the press, ensuring ink rollers are not in contact with the laser
plate.
• Ensure plate is evenly wet with diluted fountain solution.
• Start press as usual.
• Run dampening rollers 10 to 15 seconds, then drop form rollers and begin print cycle.
ADDITIONAL TIPS
Increase Run Length
• Use a laser printer with correct combination of fuser temperature (320°F to 500°F) and printer
speed (4 to 12 pages per minute).After imaging, use a post-baking device or pass the plate
through the printer 2 to 4 more times without imaging to improve fusing of toner.
• Never use plate etch or other harsh chemicals.
• Always use diluted fountain solution (ideal pH level is 4.5 to 5.5).
• Set printing press with the minimum roller pressures possible.
Reduce Toner Scatter & Random Imaging
• Store MICR-Line™ plates flat in the original bag in a clean and dry location and out of direct light.
• Store the printer in an area free of airborne particles, such as in a plate room or office.
• When removing a sheet from the polyethylene wrap, retain protective paper sheets on top and
bottom of stack to prevent polyethylene oils from transferring to MICR-Line™ plates.
• Clean laser printer regularly.
• Dedicate a laser printer exclusively to imaging laser plates.
• If trimming MICR-Line™ plates, back trim the leading edge being fed into the laser printer. Punch
the plate after imaging.
• Laser printer toner density should be at the lowest setting possible.
• Print the image on 10 to 15 sheets of paper before imaging the plate to clear excess toner.
• Once imaged, avoid touching plate until it has cooled. Wearing disposable gloves is
recommended.
• Use MICR-Line™ Plate Cleaner to remove any background tint, toner scatter, or fingerprints.
LASER PLATES
V3801 LASER PLATE 12 X 19 7/8 (100)
V3802 LASER PLATE 11X 18 1/2 (100)
V3803 LASER PLATE 10 1/2 X 15 1/2 (100)
V3804 LASER PLATE 10 X 12 (100)
V3805 LASER PLATE 12 X 18 (100)
V3806 LASER PLATE 11 1/4 X 18 1/2 (100)
V3807 LASER PLATE 10 X 15 1/2 (100)
V3808 LASER PLATE 11 X 17 (100)
V3809 LASER PLATE 11.7 X 18.5 (100)
V3810 LASER PLATE 11 X 18 (100)
V3811 LASER PLATE 12 1/8 X 18 1/2 (100)
V3812 LASER PLATE 12 1/2 X 19 3/8 (100)
V3813 LASER PLATE 12 X 19 3/8 (100)
V3818 LASER PLATE 10 X 15 (100)
V3819 LASER PLATE 12 X 18.5 (100)
V3820 LASER PLATE 11.8 X 17.5 (100)
V3821 LASER PLATE 8.625 X 12 (100)
V3822 LASER PLATE 8.625 X 14 (100)
V3823 LASER PLATE 10 X 18 (100)
V3824 LASER PLATE 13 X 19.375 (100)
V3825 LASER PLATE 13 X 19.875 (100)
V3826 LASER PLATE 24 X 36 (100)
V3827 LASER PLATE 11.75 X 18.5 (100)
V3828 LASER PLATE 11.7 X 19.375 (100)
V3829 LASER PLATE 9.875 X 12.187 (100)
HEATH CUSTOM PRESS www.heathcustompress.com
PO Box 1638
Auburn, WA 98001
1-800-819-8961 1-253-856-1422 fax 1-253-856-1003 email customerservice@heathcustompress.com