Filter
Top Products
Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description Spare part number
750-GB, 7200-rpm hard drive 633252-001
640-GB, 5400-rpm hard drive 637312-001
500-GB, 7200-rpm hard drive 634919-001
500-GB, 7200-rpm hard drive (for use in the upgrade bay) 656424-001
500-GB, 5400-rpm hard drive 634932-001
320-GB, 7200-rpm, Self-Encrypting Drive (SED) hard drive 626978-001
320-GB, 7200-rpm hard drive 627731-001
320-GB, 5400-rpm hard drive 622643-001
250-GB, 7200-rpm hard drive 635225-001
256-GB solid-state drive 669684-001
256-GB solid-state drive, Self-Encrypting Drive (SED) 684565-001
256-GB solid-state drive, SATA III 681123-001
160-GB solid-state drive 643916-001
128-GB solid-state drive 643917-001
128-GB solid-state drive, SATA III 681122-001
120-GB solid-state drive 669685-001
Upgrade Bay - Hard Drive Adapter Kit 643921-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 63).
5. Remove the bottom door (see
Bottom door on page 70).
Remove the hard drive:
1. Position the computer upside-down, with the battery bay toward you.
2. If necessary, lift the smart card reader out of the way.
3. Loosen the three captive Phillips screws (1) that secure the hard drive to the computer.
76 Chapter 4 Removal and replacement procedures