Filter
Top Products
HP LaserJet M1522 MFP Series – Fax
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
3
www.hp.com
How do I? Steps to perform
Send a fax from the flatbed scanner
(continued)
9 If you have more pages to scan, press 1 to select Yes,
and then repeat step 3 for each page of the fax job.
-Or-
If you are finished, press 2 to select No, and then go
to the next step.
Fax from the automatic document feeder
(ADF)
1 Insert the top-end of the stack of originals into the
document feeder input tray, with the media stack face-
up and the first page to be copied on top of the stack.
2 Slide the stack into the ADF until it does not move any
farther.
Document loaded appears on the control-panel
display.
CAUTION: To prevent damage to the product, do not use
an original that contains correction tape, correction fluid,
paper clips, or staples. Also, do not load photographs,
small originals, or fragile originals into the ADF. Use the
flatbed glass to scan these items.
3 Adjust the media guides until they are snug against
the media.
4 Use the alphanumeric buttons on the control panel to
dial the number.
-Or-
If the fax number you are calling has been assigned to
a one-touch key, press that key.
-Or-
If the fax number you are calling has a speed dial or
group-dial entry, press Phone Book, use the
alphanumeric buttons to specify the speed dial or
group-dial entry, and then press OK.
5 On the control panel, press Start Fax. The product
starts the fax job.
Document loaded