Filter
Top Products
Using the on-screen menu 37
Quick choice menu
Input menu
For a visual aid, see “Back panel” on page 10.
Quick choice menu
Keystone Corrects the slanted sides of the picture. This compensates for a projector
that is too high or low relative to the screen.
Auto keystone Sets whether slanted edges of the picture are automatically corrected.
Reset keystone Resets the keystone correction to zero (no correction).
Source Displays the picture from the next input port.
Picture mode Adjusts color and picture settings to one of several combinations designed
for different types of viewing situations. You can use a different picture
mode for each source or each viewing environment. You can also customize
each picture mode.
Auto-sync Resynchronizes the projector to the input signal. This can compensate for
any change in the signal.
Hide Blanks the picture. Press any button to show the picture again.
Volume Adjusts the loudness of the speaker.
Mute Temporarily turns off the projector's speaker.
Input menu
VGA Shows the source connected to the VGA port.
Composite Shows the source connected to the composite-video port.
S-video Show the source connected to the S-video port.
Source scan Sets whether the projector automatically searches for input signals and
displays the next one found.
Widescreen input Sets whether a widescreen (16:9) input device is in use. Adjusts the height
of the picture accordingly.