Filter
Top Products
C-2 Compaq NC3120 Fast Ethernet Server Adapter User Guide
UTP Cable Specifications
To connect to the network, the NC3120 adapter uses the following cable.
10BASE-T
Category 3 (or better) UTP twisted-pair
■
■
■
■
■
■
22-26 AWG, 100Ω at 1MHz
EIA/TIA 568a or EIA/TIA 568b
100BASE-T
Category 5 (or better) UTP twisted pair
22-26 AWG, 100Ω at 1MHz
EIA/TIA 568a or EIA/TIA 568b
RJ-45 Pinouts and Crossover Function
The Ethernet standard also specifies that each segment implement a crossover function to
connect the transmitter of one device to the receiver of a device at the other end, and vice-versa.
The crossover function may be implemented internally at the hub or switch, or externally
through the twisted-pair media.
10/100 Straight-Through Pinouts
If the crossover function is implemented internally, the port is labeled MDI-X (Medium
Dependent Interface–Crossover). When an MDI-X port is connected to an MDI port, the
twisted-pair media should be wired straight-through using the physical pinouts indicated in
Table C-2.
Table C-2
10/100 Pinouts Using Internal, Straight-Through Crossover
Pin Function Color Match Function Pin
1 TD+ White/Orange TD+ 1
2 TD- Orange/White TD- 2
3 RD+ White/Green RD+ 3
4 Blue/White 4
5 White/Blue 5
6 RD- Green/White RD- 6
7 White/Brown 7
8 Brown/White 8