Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 6–5
6.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
b. Slide the battery release latch 1 toward you. (The left side
of the battery pack disengages from the notebook.)
c. Lift the left side of the battery pack and swing it to the
right 2 to remove it.
Removing the Battery Pack
Reverse the above procedure to install the battery pack.
Battery Pack Spare Part Number Information
6-cell battery pack 383510-001