![](http://pdfasset.owneriq.net/4/1b/41bded7d-1a43-40fe-a71a-d3431446eab3/41bded7d-1a43-40fe-a71a-d3431446eab3-bg43.png)
5. Remove the two Phillips PM2.0×4.0 screws that secure the module to the computer (2).
6. Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE: WWAN modules are designed with a notch (4) to prevent incorrect insertion.
Reverse this procedure to install the WWAN module.
Component replacement procedures 59