Filter
Top Products
5–42 Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the SD Card slot/infrared module cable 1 from
the LIF connector on the module.
✎
The SD Card slot/infrared module cable is included
with the SD Card slot/infrared module. It is also
included in the Miscellaneous Cable Kit, spare part
number 344851-001.
3. Remove the 3 PM2.5×8.0 screws 2 that secure the module
to the notebook.
4. Remove the module bezel 3.
✎
The SD Card slot/infrared module bezel is included
in the Miscellaneous Plastics Kit, spare part
number 344852-001 or 370805-001.
5. Remove the module 4.
Removing the SD Card Slot/Infrared Module
Reverse the above procedure to install the SD Card slot/infrared
module.