Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–21
5.9 LED Board
1. Prepare the notebook for disassembly (refer to Section 5.3).
2. Remove the switch cover (refer to Section 5.8).
3. Remove the three PM2.0×3.0 screws 1 that secure the LED
board to the switch cover.
4. Remove the LED board 2.
5. Release the ZIF connector 3 to which the LED board cable
is connected and disconnect the cable 4.
Removing the LED Board
Reverse the above procedure to install the LED board.
Spare Part Number Information
LED board (includes cable) 378772-001