Filter
Top Products
English19
hp pavilion fx50 15” lcd monitor
Using Your Monitor
English
When the monitor enters power saving mode, the message No
Signal is displayed for a few seconds before the screen blanks. In
power saving mode the front panel indicator light is amber.
To set these power saving modes, refer to the manual that came with
your computer.
Supported Video Modes
Your monitor comes with the standard modes shown in the table
below. It also supports intermediate video modes. With the
intermediate modes, the displayed image may need to be optimized
using the buttons on the front panel. All modes are non-interlaced.
NOTE Selecting a combination of screen resolution/image refresh rate
higher than 1024 x 768 at 75Hz will effect display performance.
If you select a video mode not supported by your monitor, the
following message will be displayed:
Screen Resolution
Image Refresh
Rate
640 x 350 70Hz
640 x 480 60Hz, 75Hz
720 x 400 70Hz
800 x 600 60Hz, 75Hz
1024 x 768 60Hz, 75Hz
X