Filter
Top Products
System Fans
3 dual rotor fans ship standard with X3360, X3350, X3320, and E3110 models.
4 dual rotor fans ship standard with all other models (e.g. X3220, X3210, 3075, 3065, E4600,
E4400, E2160, 440 and 420 models).
Ultra Thin Rack
Deployment Overview
For the Ultra Thin Rack Deployment Overview, including best practices for the HP ProLiant DL320
G5p, please see the following URL:
www.hp.com/servers/dl320-g5
.
Required Cabling
For required cabling information, refer to the Web site at:
www.hp.com/servers/dl320-g5
.
OS Support
Microsoft Windows Server 2003 (web, standard, and enterprise editions; standard and enterprise
editions for 64-bit extensions)
Microsoft Windows Small Business Server 2003, R2
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE:
Support differences will exist between the SATA and SAS configurations.
NOTE:
For a more complete and up-to-date listing of supported OSs and versions, please visit our
OS Support Matrix at:
http://www.hp.com/go/supportos
.
NOTE:
For an up-to-date listing of the latest software and drivers available for your server, please
select your server:
http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=
en&cc=us&taskId=135&prodTypeId=15351&prodCatId=241435
.
NOTE:
For more Linux OS support & certification information, please visit our the ProLiant &
BladeSystem Server Linux matrix
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE:
For more complete and up-to-date information on how to buy server operating systems
from HP please visit the OS product site at:
http://h18004.www1.hp.com/products/servers/software/OEM.html
Rack Airflow
Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION:
If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors
: If your 42U server rack includes closing front and rear doors, you must
allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side
: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 7 cm (2.75 inches)
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
NOTE:
For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section at the
following URL:
http://h18004.www1.hp.com/products/servers/proliantdl320/index.html
.
QuickSpecs
HP ProLiant DL320 Generation 5p
Standard Features
DA - 12854 Worldwide QuickSpecs — Version 12 — 5-28-2008
Page 11