Filter
Top Products
LJ1320 7-20-06 EL-MF877-00 Page 2
Template Revision A
1320, 1320n, 1320 nw
1320tn
plastic
parts:
33
36
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
- toner cartridges
1
Components and waste containing asbestos [not present] 0
Components, parts and materials containing
refractory ceramic fibers
[not present] 0
Components, parts and materials containing
radioactive substances
[not present] 0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Use standard hand tools.
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove toner cartridges and toner waste containers, if applicable.
2. Remove the outer housing skins and sort according to markings.
3. Disassemble the chassis using appropriate tools and set aside items requiring selective treatment.
4.
5.
6.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).