Filter
Top Products
EL-MF877-00 Page 2
Template Revision A
including liquids, semi-liquids (gel/paste) and toner printheads)
Tubes, Service Stations, ISS and
Spittoon assemblies
16 (Rest of models)
Components and waste containing asbestos 0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
Tool Description Tool Size (if applicable)
Nut Driver with attachements 3/16 inch and 5.5 mm
Long Torx Screwdriver with attachments 8-9-10-15-20-15L
Small flat-blade screwdriver
3.0 Product Disassembly Process
3.1 List of the basic steps:
1. Follow the Graphic instruction 1 to segregate components containing ink (#2 & #3).
2. Follow the Graphic instruction 2 & 3 to disassembly external covers.
3. Follow the Graphic instructions 1, 4, 5, 6, 7 & 8 to segregate PCA, PCB and condensers depending on the printer
model.
4. Follow the Graphic instructions 4 & 7 to segregate parts of the showed assemblies containing ink.
3.2 Graphics.
Graphic 1
: