HP (Hewlett-Packard) rp7420 Server User Manual


 
I/O Buses and Slots
Total Hot-plug PCI-X
Slots
(133 MHz×64 bits)
15
14 Dual channel slots (1060 MB/s each)
2 Single channel (530 MB/s each)
Maximum I/O Cards
See supported I/O table
Mass Storage
8-15
LAN
15
WAN
15
Multi-Function (Mass
Storage / LAN)
15
Additional Interface
Cards
4-15
Electrical
Characteristics
AC Input power
200-240V 50/60 Hz
Hotswap Power
supplies
2 total, included with base
Redundant AC power
inputs
2 required, 4 cords for 2N
Typical maximum
power dissipation for
maximum processor,
memory, disk, I/O
configurations
2015 VA (1975 W)
10.08A @200VAC
Marked Electrical per
server
2640 VA (12A @ 220VAC)
Marked Electrical per
line cord
1320 VA (6A @ 220VAC)
Power factor at full
load
0.98 (approximately)
kW rating for UPS
loading
1
3.0
NOTE 1:
Represents theoretical maximum power/heat dissipation under worst case conditions,
may increase with future upgrades.
Site Preparation
Site planning and
installation included
Yes
Depth
(inches/mm)
30 in (762 mm)
Width
(inches/mm)
19 in (482 mm)
Height
(inches/mm/EIA)
Racked
17.5 in (445 mm) 10 units
Weight
(lb/kg)
101.6 kg./224 lbs.
QuickSpecs
HP 9000 rp7420 Server
Technical Specifications
DA - 11895 U.S. QuickSpecs — Version 24 — 10/1/2006
Page 21