Filter
Top Products
RPC SERIES OWNER’S MANUAL
INSTALLATION
________________________________________________________________________________
13
POWER
CAUTION:
This unit is intended for indoor use only. Do not
install near water or expose this unit to moisture. To prevent heat
buildup, do not coil the power cord when in use. Do not use
extension cords. Do not attempt to make any internal changes to
the power source. Do not attempt to modify any portion or
component of an RPC Series Unit unless specifically directed to.
BayTech must perform any internal operations.
CAUTION:
High-voltage surges and spikes can damage this
equipment. To protect from such power surges and spikes, this
unit must have a good earth ground. There is an earth ground
connection next to the circuit breaker.
CAUTION:
Before removing or replacing any cables or power
cords, turn off main power switch located on the RPC Series Unit.
Communication to the unit will be disrupted while power is off.
CAUTION:
Do not exceed the AC current rating for the selected
model. (See Appendix A “SPECIFICATIONS” for each RPC
model).
CAUTION:
Although the power switch is turned OFF, the unit is
not totally isolated from the power supply. In order to be
absolutely removed from the power supply, the power cord must
be unplugged from the unit.
CAUTION:
For PERMANENTLY CONNECTED
EQUIPMENT, a readily accessible disconnect device shall be
incorporated in the fixed wiring. For PLUGGABLE
EQUIPMENT, the socket-outlet shall be installed near the
equipment and easily accessible.
Applying power illuminates a green LED on the front panel of the RPC.
When the power switch is off, devices connected to the unit are not
receiving power.