Filter
Top Products
2
Internal drive support
Hard disk drives*
Protocol support
Server blade support
Storage capacity
RAID support
Form factor
Dimensions (HxWxD)
Weight (unloaded)
Weight (loaded)
Operating system support
LED indicators
Drive LED Indicators
(on drive trays)
Relative Humidity
(non-condensing)
Temperature range
Warranty
Storage controller
Disk drive and
enclosure interface
SAS connectors
Cache memory speed
SAS speed
Cache memory
Logical drive support
Maximum logical drive capacity
Host memory addressing
RAID support
Upgradeable firmware
Supports up to 6 SAS (Serial Attached SCSI) or SATA (Serial Advanced Technology Attachment)
universal hot-plug hard disk drives
Allows for the mix of SAS and SATA drives in the same enclosure at the same time
SFF SAS 36 GB, 72 GB, and 146 GB 10K drives
SFF SATA 60 GB 5400-rpm drives
3Gb/s SAS
1.5Gb/s SATA
Supports all BladeSystem c-Class server blades
Note: HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
is required to support HP BladeSystem c-Class full-height server blades
Up to 876 GB per enclosure (using 146 GB 10K disk drives)
Dedicated storage for adjacent server blade
RAID 0, 1+0, 5, 6 with Advanced Data Guarding using the Smart Array P400 array controller
4U BladeSystem c-Class storage blade
Fits into a half-height bay on the BladeSystem c7000 Enclosure
2.19 x 7.154 x 20.058 in (5.56 x 18.17 x 50.95 cm)
8 lb (3.63 kg)
11 lb (4.99 kg)
Please refer to the SB40c QuickSpecs and/or User Guide for the latest support information
UIDSystem
Health LED
Drive LED (top)—Online/Activity
Drive Failure LED (bottom)—Drive Fault/Locate
Operating: 10 to 90%
Shipping: 5 to 95%
Operating: 50° to 94° F (10° to 35° C°)
Shipping: -22° to 140° F (-30° to 60° C)
Note: To maintain proper cooling and airflow, a drive blank or drive must occupy
all bays during operation.
Protected by HP Services and a worldwide network of resellers and service providers
3-year parts, 3-year labor and 3-year on-site limited global warranty; certain restrictions
and exclusions apply.
SATA hard drives have a one year warranty
*Note: For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
Integrated Smart Array P400 RAID controller
3G SAS
1.5G SATA
2 internal (SFF8484) x4 wide port connectors
DDR2-533MHz with provides up to 4.2 GB/s maximum bandwidth.
x8 3G SAS provides 2.4 GB/s maximum bandwidth
40-bit 256 MB cache; ECC protection, battery-backed, and transportable
Up to 32 logical drives
876 GB (6 x 146GB)
64-bit, supporting greater than 4 GB server memory space
RAID 6 with ADG
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Upgradeable Firmware with recovery ROM feature
Technical Specifications
Smart Array P400 Controller
SB40c Storage Blade