Filter
Top Products
Maintenance 20
Shipping the TFT7600 RKM
Keep the original packing box in a storage area in case you must move or ship your RKM.
Moving a rack with the TFT7600 RKM installed
When moving the TFT7600 RKM installed in a rack, HP recommends that you install the lock plates,
included in your kit, on each side of the unit and rack.
To install lock plates:
1. Place the lock plate into the slot and rotate it back.
2. Insert one M6 screw into the hole on the lock plate, securing the unit to the rack.
3. Repeat steps 1 and 2 to install the other lock plate.