Filter
Top Products
Installation 7
Installation
Kit contents
Item Quantity
HP TFT7600 KVM Console
1
M6 screws
4
6-32 screws
5
HP Adjustable Toolless Rails
2
Cable management arm, power adapter with brace rail
1
Lock plates
2
USB cables
2
PS2 cables
2
Video cable
1
Power cords
2
USB cable labels
2
This kit might contain extra hardware.
Installing the HP TFT7600 G2 Rackmount Keyboard
Monitor KVM Console
1. Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into place.
a. Snap one end of the HP 1U Adjustable Toolless Rails into the retna rails.
b. Extend the other half of the HP 1U Adjustable Toolless Rails to meet the appropriate rack depth, and
snap them into place.
NOTE: If the HP 1U Adjustable Toolless Rails do not snap into place, be sure that they align with
the holes marked on the rack. The holes marked on the rack must be in the same location for the
front and rear of the rack.