Filter
Top Products
23
8 Ultrium format standard
Compatibility
HP Gen 3 Ultrium drives are specified to interchange data cartridges with other tape drives
that comply to the LTO U-18, U-28, and U-316 specification documents:
This specification is only applicable when:
• Cartridges carry the Ultrium logo.
• Cartridges are not damaged or faulty.
• Cartridges are read on a drive in good operating condition, and have been written on a
logo-certified drive that is in good condition.
• The environmental conditions (including DC voltage supplies) are within the specified limits.
NOTE: HP Gen 3 Ultrium drives do not support 10 GB and 30 GB cartridges. HP
recommends the use of the
SET CAPACITY SCSI command to shorten standard cartridges
logically for test purposes.
Future compatibility
In future, HP Ultrium drives will always be capable of reading and writing tapes from the
current generation and one generation before, and reading tapes from two generations before.
HP Ultrium drives will always maintain write and read compatibility with other manufacturers’
Ultrium drives and tapes that meet the LTO Ultrium format specification.
Capacity (2:1 compression) Format Write Read
800 GB WORM Ultrium-3 Yes Yes
800 GB (680m) Ultrium-3 Yes Yes
400 GB (580m) Ultrium-2 Yes Yes
200 GB (580m) Ultrium-1 No Yes
100 GB (290m) Ultrium-1 No Yes