Filter
Top Products
Safety and Maintenance Guidelines
Be sure the total ampere rating of the products connected to the
outlet does not exceed the current rating of the electrical outlet,
and the total ampere rating of the products connected to the cord
does not exceed the rating of the cord. Look on the power label
to determine the ampere rating (AMPS or A) for each device.
Install your monitor near an outlet that you can easily reach.
Disconnect the montor by grasping the plug firmly and pulling it
from the outlet. Never disconnect the monitor by pulling the
cord.
Turn off your monitor off when not in use. You can substantially
increase the life of your monitor by using a screen saver program
and turing off the monitor when not in use.
Unplug your monitor from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning. If the screen requires additional cleaning, use an
antistatic CRT screen cleaner.
CAUTION:
Do not use benzene, thinner, ammonia, or any other volatile
substances to clean your monitor or the screen. These chemicals may
damage the cabinet finish as well as the screen.
Slots and opening in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push
objects of any kind into cabinet slots or other openings.
Do not place plants on top of your monitor. Water or dirt from
the plant may get into the vents.
Do not drop your monior or place it on an unstable surface.
Do not all anything to rest on the power cord. Do not walk on the
cord.
Keep your monitor in a well ventilated area, away from
excessive light, heat, or moisture. Keep your monitor away from
high-capacity transformers, electical motors, and other devices
with strong magnetic fields.
In a two-monior system, place your monitors as far apart from
one another as possible to lessen interference between them.
Reference Guide 2-3