Filter
Top Products
Maintenance
25
User’s Guide
MAINTENANCE
Lamp Information
Lamp LED Indicator
Lamp Replacement
When the Lamp Indicator lights up red or a message appears suggesting the time of
lamp replacement, please install a new lamp or consult your dealer. An old lamp could
cause a malfunction in the projector and in rare instances may even explode.
Warning
To reduce the risk of electrical shock, always turn off the projector and dis-
connect the power cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45
minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components,
use caution when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality
by touching the lens, do not touch the empty lamp compartment when the
lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regula-
tions to dispose of this lamp in a proper manner.
Lamp LED is off Lamp is operating normally.
Lamp LED is on Lamp is burned out or not properly installed. Repace the
lamp.