Filter
Top Products
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE:
FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant WS460c G6 CTO Blade
580139-B21
Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and one
(1) additional 10/100 server adapter dedicated to iLO 2 management
NOTE:
Initially at time of product launch, device driver will only support 1Gbps speed
and Flex-10 will not be supported. Requires 1Gbps only interconnect switches in
enclosure.
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
For single processor configuration choose:
NOTE:
HP ProLiant WS460c G6 shares same processor modules with BL460c G6
server.
Quad-Core Processor Option Kits
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507791-L21 and one 507791-B21.
507791-L21
Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507792-L21 and one 507792-B21.
507792-L21
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507793-L21 and one 507793-B21.
507793-L21
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507794-L21 and one 507794-B21.
507794-L21
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507795-L21 and one 507795-B21.
507795-L21
Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507797-L21 and one 507797-B21.
507797-L21
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507798-L21 and one 507798-B21.
507798-L21
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) BL460c G6 Kit, FIO
NOTE:
If two processors are desired, select one 507799-L21 and one 507799-B21.
507799-L21
QuickSpecs
HP ProLiant WS460c Generation 6 (G6)
Workstation Blade
Configuration Information - Factory Integrated Models
DA - 13429 Worldwide QuickSpecs — Version 3 — 2.16.2010
Page 10