Filter
Top Products
24 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX
Connect the disk array
The HP service representative connects the disk array to the host by:
1. Verifying operational status of the disk array channel adapters, LDEVs,
and paths.
2. Connecting the Fibre Channel cables between the disk array and the
fabric switch or host.
3. Verifying the ready status of the disk array and peripherals.
Defining the paths
Use Command View (shown) or LUN Configuration Manager to create
paths (LUNs) between hosts and volumes in the disk array. This process is
also called “LUN mapping.” LUN mapping includes:
• Configuring ports
• Setting LUN security
• Creating host groups
• Assigning host bus adapter WWNs to host groups
• Mapping volumes to host groups (by assigning LUNs)
See the Command View or LUN Configuration Manager guide for more
information. Note the LUNS and their ports, WWNs, nicknames, and
LDEVs for later use in verifying host and device configuration.