Filter
Top Products
English 13
Configuring Your Network Connection
Configuring Your Network Connection
You need to use the PC Workstation’s Setup program to change the
integrated Ethernet interface settings. To access the Setup program,
Press while the initial “Kayak” logo is displayed immediately after
restarting the PC Workstation.
The following table summarizes which network options you can set
using the Setup program. To
Controlling the Network Security Features
The Security Features allow you to enable starting from the network if
you want the PC Workstation to start from a LAN server.
To enable starting from the network:
1 Press while the initial “Kayak” logo is displayed immediately
after restarting the PC Workstation to access the Setup program.
Use the or key to select the
Boot menu.
2 Check that
Option ROM is enabled on the PCI 5 (Advance PCI5).
Network Setup Items
1
1. For full information on setting up your network, refer to the online Network Administrator’s
Guide preloaded onto your PC Workstation.
Where to find in Setup
Enable your PC Workstation to be started (booted
and logged on) from the network.
In the Security menu, go to the Boot Devices
Security submenu (described below).
Enable remote power-on of your PC Workstation. In the Power menu, enable the Integrated
Network item.
From “Suspend Wakeup” mode, enable your PC
Workstation to return to full power when a
command is received by the integrated network
interface.
In the Power menu, enable the Network
Interface item.
Determine boot device priority. In the Boot menu, select the Boot Device
Priority list item.