HP (Hewlett-Packard) XW9300 Computer Hardware User Manual


 
Intel Pro/1000 MT
Gigabit PCI NIC
Connector
RJ-45
Controller
Intel 82540EM Gigabit Controller
Memory
Integrated 96Kb frame buffer memory
Data rates supported
10/100/1000 Mbps
Compliance
IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and
802.3u compliant, 802.3x flow control
Bus architecture
PCI 2.2
Data path width
32-bit, 33/66 MHz bus interface
Data transfer mode
Bus-master DMA
Hardware certifications
FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS
Mark for European Union
Power requirement
1.48 watts @ +3.3V AUX supply with 5V tolerance
Boot ROM support
Yes
Network transfer rate
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Environmental
Operating temperature
32° to 131° F (0° to 55° C)
Operating humidity
85% at 131° F (55° C)
Dimensions
6.4 x 4.8 x 0.8 in (16.3 x 12.1 x 1.9 cm)
Operating system
driver support
Microsoft Windows XP Professional, Microsoft Windows XP
Professional x64 Edition, Red Hat Enterprise Linux
Management
capabilities
ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
Kit contents
Intel Pro/1000 MT Gigabit PCI NIC, CD containing Intel PROset II NIC
drivers, quick install guide, product warranty statement
QuickSpecs
HP xw9300 Workstation
Technical Specifications - Communications
DA - 12186 Worldwide QuickSpecs — Version 25 — 4.30.2006
Page 29