Filter
Top Products
16GB (4x4GB) DDR3-1333 ECC Registered RAM 2-
CPU
Both processor
sockets must be
populated.
24GB (6x4GB) DDR3-1333 ECC Registered RAM 2-
CPU
Both processor
sockets must be
populated.
32GB (4x8GB) DDR3-1333 ECC Registered RAM 2-
CPU
Both processor
sockets must be
populated.
48GB (6x8GB) DDR3-1333 ECC Registered RAM 2-
CPU
Both processor
sockets must be
populated.
Sub-Section Description/Notes
Both processor
sockets must be
populated.
The Z600 has a three-channel memory architecture. Three channels are associated with each
processor. For optimal performance, populate a DIMM in each channel.
AMO
PC3-10600 DDR3-1333 ECC Unbuffered DIMMs AMO
1GB (1x1GB) DDR3-1333 ECC Unbuffered RAM
FX698AA
2GB (1x2GB) DDR3-1333 ECC Unbuffered RAM
FX699AA
4GB (1x4GB) DDR3-1333 ECC Unbuffered RAM
NL797AA
PC3-10600 DDR3-1333 ECC Registered DIMMs AMO
8GB (1x8GB) DDR3-1333 ECC Registered RAM
FX622AA
4GB (1x4GB) DDR3-1333 ECC Registered RAM
FX621AA
NOTE:
Although all of these memory configurations incorporate 1333MHz memory modules, the
speed at which they operate is dependent upon the processor.
Support for Registered DIMMs on the Z600 requires a systemboard with the C2 revision of the
Intel 5520 chipset. Two methods are available to determine if a specific Z600 system has the C2
revision of the chipset. 1. Use the BIOS setup menu to access the “Boot Block Date” from the
“System Information Menu”. All B3-based systems will have a “1/30/09” date and C2-based
systems will have a "01/07/10" date. 2. HP Performance Advisor SW can be used to determine
the PCA ID, which is reported by Performance Advisor under “System Configuration” and
“Baseboard ID”. All B3-based systems will have the ID "0AE8h" and all C2-based systems will
have the ID "0B54h".
QuickSpecs
HP Z600 Workstation
Supported Components
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010
Page 11