Filter
Top Products
5–20 Maintenance and Service Guide
Removal and Replacement Procedures
5.9 LED Board
1. Prepare the notebook for disassembly (refer to Section 5.3).
2. Remove the switch cover (refer to Section 5.8).
3. Release the zero insertion force (ZIF) connector 1 to which
the LED board cable is connected and disconnect the cable.
4. Remove the PM2.0×4.0 screw 2 that secures the LED board
to the top cover.
5. Lift the left side of the LED board 3 until the board
disengages from the alignment pins 4 on the top cover.
Releasing the LED Board
Spare Part Number Information
LED board (includes cable) 378771-001