Filter
Top Products
Icon Main Menu Submenu Description
Custom Scaling Selects the method on how displayed information on
the monitor will be formatted. Select:
●
Fill to Screen - image fills the entire screen and
may look distorted or elongated because of non-
proportional scaling of height and width
●
Fill to Aspect Ratio - image is sized to fit the
screen and maintains proportional image
●
Overscan - Supports over-scanning of the image
for DVI-D and DisplayPort inputs. This option can
be set to:
◦
Off
◦
On
Sharpness Adjusts the screen image to look sharper or soft.
Video Overdrive Turns Video Overdrive On or Off. The factory default
is Off.
Dynamic Contrast Ratio Turns Dynamic Contrast Ratio On or Off. The factory
default is Off.
OSD Control Provides a menu for adjusting the on-screen display
(OSD) controls.
Horizontal OSD
Position
Changes the viewing position of the OSD menu to the
left or right area of the screen. The factory default
range is 50.
Vertical OSD Position Changes the viewing position of the OSD menu to the
top or bottom area of the screen. The factory default
range is 50.
OSD Transparency Adjust to view the background information through the
OSD.
OSD Timeout Sets the time duration in seconds that the OSD is
visible after the last button is pressed. The range is 5
– 60 seconds. The factory default is 30 seconds.
Rotate OSD Rotates the OSD menus and messages to support the
monitor's pivot feature. The choices are Landscape
and Portrait.
Management Selects the OSD and power management features of
the monitor.
Power Saver Enables the power saving feature. Select:
●
On
●
Off
The factory default is On.
Table 4-2 OSD Menu (continued)
22 Chapter 4 Operating the Monitor ENWW