Hitachi 55PMA550E Computer Monitor User Manual


 
9
ENGLISH
Remote control
ID SET button
16
POWER OFF button
13
POWER ON button
13
POWER ON/OFF button
13
MENU button
16
MUTE button
14
VOLUME UP/DOWN buttons
14
RETURN button
16
RECALL button
15
AUTO button
16
PinP button
34
ID button
16
SELECT/ADJUST buttons
16
OK button
16
Loading Batteries
1. Open the battery cover.
Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries.
Load two Size AA batteries included observing the correct
polarities.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap
it back into place.
Use the remote control within about 5 m from front of the units
remote-control sensor and within 30 degrees on both sides.
With in 30
degrees
About 5m
About 3m
With in 30
degrees
About 3m
AV1 AV 2
RGB 1 RGB 2
AV3
MUTEVOL
VOL
AV4
AUTO PinP
OK
SIZE RECALL
MENU
ID ID SET
Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
CAUTION
ATTENTION
Do not drop or impact the remote control.
Do not splash the remote control with water or put it on a wet
object to avoid possible failures.
Before leaving the remote control out of use for an extended
period of time, remove the batteries from it.
If the remote control begins to lack responsiveness, replace the
batteries.
Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
Handling the Remote Control
SIZE button
15
RGB/VIDEO buttons
14
AV1 AV2
RGB 1 RGB 2
AV3
MUTE VOL
VOL
AV4
AUTO PinP
OK
SIZE RECALL
MENU
ID
ID SET