Hitachi CP-S210F Projector User Manual


 
3
Example Of Computer Signal
Resolution
H
××
V
fH (kHz) fV (Hz) Rating Signal mode
Display
mode
720 × 400
37.9 85.0 VESA TEXT Zoom in
640 × 480
31.5 59.9 VESA VGA (60Hz) Zoom in
640 × 480
35.0 66.7 Mac13"mode Zoom in
640 × 480
37.9 72.8 VESA VGA (72Hz) Zoom in
640 × 480
37.5 75.0 VESA VGA (75Hz) Zoom in
640 × 480
43.3 85.0 VESA VGA (85Hz) Zoom in
800 × 600
35.2 56.3 VESA SVGA (56Hz)
800 × 600
37.9 60.3 VESA SVGA (60Hz)
800 × 600
48.1 72.2 VESA SVGA (72Hz)
800 × 600
46.9 75.0 VESA SVGA (75Hz)
800 × 600
53.7 85.1 VESA SVGA (85Hz)
832 × 624
49.7 74.5 Mac16"mode Zoom out
1024 × 768
48.4 60.0 VESA XGA (60Hz) Zoom out
1024 × 768
56.5 70.1 VESA XGA (70Hz) Zoom out
1024 × 768
60.0 75.0 VESA XGA (75Hz) Zoom out
1024 × 768
68.7 85.0 VESA XGA (85Hz) Zoom out
1152 × 864
67.5 75.0 VESA SXGA (75Hz) Zoom out
1280 × 960
60.0 60.0 VESA SXGA (60Hz) Zoom out
1280 × 1024
64.0 60.0 VESA SXGA (60Hz) Zoom out
1280 × 1024
80.0 75.0 VESA SXGA (75Hz) Zoom out
1280 × 1024
91.2 85.0 VESA SXGA (85Hz) Zoom out
1600 × 1200
75.0 60.0 VESA UXGA (60Hz) Zoom out
Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
Be sure to check jack type, signal level, timing and resolution before connecting this projector to a
computer.
Depending on the input signal, full-size display may not be possible in some cases. Refer to the
number of display pixels above.
Although the projector can display signals with resolution up to UXGA (1,600 x 1,200), the signal will
be converted to the projector’s panel resolution before being displayed. The best display
performance will be achieved if the resolutions of the input signal and projector panel are identical.
The image may not be displayed correctly when the input sync. signal is “Composite Sync.” or
“Sync. on G”.
Automatically adjustment may not function correctly with some input signals.
When the image resolution is changed on a computer, depending on an input, automatic adjust
function may take some time and may not be completed. In this case, you may not be able to see a
check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to
the original. It might be recommended to use other CRT or TFT monitors to change the resolution.
NOTE