Hitachi CP-X327W Projector User Manual


 
14
STANDBY/ON
INPUT
KEYSTONE
RESET
LA
NP
TEN
P
P
O
W
ER
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2
Turn on the projector's power
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.
3
Press the STANDBY/ON button (control
panel or remote control)
The projector begins warming up and the POWER
indicator blinks green.
The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
4
Remove the lens cap
The picture is projected.
STANDBY/ON
INPUT
KEYSTONE
RESET
L
A
N
P
T
E
N
P
P
O
W
E
R
STANDBY/ON INPUT KEYSTONE RESET
LANP
TENP
POWER
power switch
KE
YSTONE
RESET
LANP
TENP
POWER
POWER indicator
STANDBY/ON
VIDEO
ASPECT
HOME
END
MUTE
PAGE DOWN
KEYSTONEFREEZE
OFF
ON
PAGE UP VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
TURNING ON THE POWER
Control panel
Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
Turn the
power on/off in
right order.
Power on the
projector before the
computer or video
tape recorder.
Power off the
projector after the
computer or video
tape recorder.
NOTE